How to set up your wifi extender?
Wifi Extender makes it possible for you to get the smartest home in your community with the new, fastest networking technologies. These devices allow users to watch stream videos with less buffering time, watch most of the stuff on their tablets without buffering,check in from your smartphone home and store and preserve all of your family’s memories. From the most advanced wireless Internet access to superior streaming and storage technologies, your home networking device will have the speed, coverage and performance you need any time you need it. We concentrate on everything relevant, with the goal of making your online experience smooth so that you can sit back, relax and do more.
Wifi extender is basically known as (wifi range increaser )or wifi range extender.it helps you to increase your wifi range to another level .For example: if a person wants to increase his wifi from one room to another rooms he will need an wifi range extender so that their wifi can go out from one room to another .
How to install as per setup guide?
- Firstly, before we use the e-cigarette, make sure the device is properly plugged into the power source.
- After all, the Wi-Fi router should be close to the AKiTiO cloud icon so that they can connect with each other .
- As you install all of your Wi-Fi devices, you will increase the length of your Wi-Fi signal .
- You can enjoy the higher bandwidth and range through the wireless network , in every room of house, office or other commercial places .
- Go to the extender.linksys.com website in case of Linksys Extender Setup.
Configure Wifi Extender Settings
A Wi-Fi range extender improves your current network range offering up to 750 mbps of AC dual band Wi-Fi. Wi-Fi is typically used with regular routers to access a computer or laptop and will suffice for games and screen streaming.
How to insert the device into the router.
- Remove the antenna caps and mount to the side of the clock. Rotate and bend the antenna and make sure that the antennas are sitting in the correct place.
- Attach the extender to the Wi-Fi router and power on the extender. Then, change the security setting for the installation of the extender and configure the operation of the wifi extender with the WPS (Wi-Fi Protected Setup) button.
- Once you have done this, press the button for three times and watch for the LED light on the wifi extender to blink green.
- After a minute the user connect to the router then we need to push the WPS button.
How to use the extender?
- Container allows the circuit element.
- Connect the antenna and the telemetry unit attachment.
- Let your modem be ready for the attached file.
- The modem must be plugged into the power plug properly so that the device can work properly.